TYPO3 Fluid ViewHelper Reference
This reference was automatically generated from code on 2024-10-23
f:alias
Declares new variables which are aliases of other variables. Takes a “map”-Parameter which is an associative array which defines the shorthand mapping.
The variables are only declared inside the <f:alias>...</f:alias>
tag. After the
closing tag, all declared variables are removed again.
Using this ViewHelper can be a sign of weak architecture. If you end up using it extensively you might want to fine-tune your “view model” (the data you assign to the view).
Examples
Single alias
<f:alias map="{x: 'foo'}">{x}</f:alias>
Output:
foo
Multiple mappings
<f:alias map="{x: foo.bar.baz, y: foo.bar.baz.name}">
{x.name} or {y}
</f:alias>
Output:
[name] or [name]
Depending on {foo.bar.baz}
.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\AliasViewHelper
map
(array): Array that specifies which variables should be mapped to which alias
f:cache.disable
ViewHelper to disable template compiling
Inserting this ViewHelper at any point in the template, including inside conditions which do not get rendered, will forcibly disable the caching/compiling of the full template file to a PHP class.
Use this if for whatever reason your platform is unable to create or load PHP classes (for example on read-only file systems or when using an incompatible default cache backend).
Passes through anything you place inside the ViewHelper, so can safely be used as container tag, as self-closing or with inline syntax - all with the same result.
Examples
Self-closing
<f:cache.disable />
Inline mode
{f:cache.disable()}
Container tag
<f:cache.disable>
Some output or Fluid code
</f:cache.disble>
Additional output is also not compilable because of the ViewHelper
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Cache\DisableViewHelper
f:cache.static
ViewHelper to force compiling to a static string
Used around chunks of template code where you want the output of said template code to be compiled to a static string (rather than a collection of compiled nodes, as is the usual behavior).
The effect is that none of the child ViewHelpers or nodes used inside this tag will be evaluated when rendering the template once it is compiled. It will essentially replace all logic inside the tag with a plain string output.
Works by turning the compile
method into a method that
renders the child nodes and returns the resulting content
directly as a string variable.
You can use this with great effect to further optimise the
performance of your templates: in use cases where chunks of
template code depend on static variables (like thoese in
{settings}
for example) and those variables never change,
and the template uses no other dynamic variables, forcing
the template to compile that chunk to a static string can
save a lot of operations when rendering the compiled template.
NB: NOT TO BE USED FOR CACHING ANYTHING OTHER THAN STRING- COMPATIBLE OUTPUT!
USE WITH CARE! WILL PRESERVE EVERYTHING RENDERED, INCLUDING POTENTIALLY SENSITIVE DATA CONTAINED IN OUTPUT!
Examples
Usage and effect
<f:if condition="{var}">Is always evaluated also when compiled</f:if>
<f:cache.static>
<f:if condition="{othervar}">
Will only be evaluated once and this output will be
cached as a static string with no logic attached.
The compiled template will not contain neither the
condition ViewHelperNodes or the variable accessor
that are used inside this node.
</f:if>
</f:cache.static>
This is also evaluated when compiled (static node is closed):
<f:if condition="{var}">Also evaluated; is outside static node</f:if>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Cache\StaticViewHelper
f:cache.warmup
ViewHelper to insert variables which only apply during cache warmup and only apply if no other variables are specified for the warmup process.
If a chunk of template code is impossible to compile without additional variables, for example when rendering sections or partials using dynamic names, you can use this ViewHelper around that chunk and specify a set of variables which will be assigned only while compiling the template and only when this is done as part of cache warmup. The template chunk can then be compiled using those default variables.
This does not imply that only those variable values will be used by the compiled template. It only means that DEFAULT values of vital variables will be present during compiling.
If you find yourself completely unable to properly warm up
a specific template file even with use of this ViewHelper,
then you can consider using
f:cache.disable
ViewHelper
to prevent the template compiler from even attempting to
compile it.
USE WITH CARE! SOME EDGE CASES OF FOR EXAMPLE VIEWHELPERS WHICH REQUIRE SPECIAL VARIABLE TYPES MAY NOT BE SUPPORTED HERE DUE TO THE RUDIMENTARY NATURE OF VARIABLES YOU DEFINE.
Examples
Usage and effect
<f:cache.warmup variables="{foo: bar}">
Template code depending on {foo} variable which is not
assigned when warming up Fluid's caches. {foo} is only
assigned if the variable does not already exist and the
assignment only happens if Fluid is in warmup mode.
</f:cache.warmup>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Cache\WarmupViewHelper
variables
(array, optional): Array of variables to assign ONLY when compiling. See main class documentation.
f:case
Case ViewHelper that is only usable within the f:switch
ViewHelper.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\CaseViewHelper
value
(mixed): Value to match in this case
f:comment
This ViewHelper prevents rendering of any content inside the tag.
Contents of the comment will still be parsed thus throwing an Exception if it contains syntax errors. You can put child nodes in CDATA tags to avoid this.
Using this ViewHelper won’t have a notable effect on performance, especially once the template is parsed. However it can lead to reduced readability. You can use layouts and partials to split a large template into smaller parts. Using self-descriptive names for the partials can make comments redundant.
Examples
Commenting out fluid code
Before
<f:comment>
This is completely hidden.
<f:debug>This does not get rendered</f:debug>
</f:comment>
After
Output:
Before
After
Prevent parsing
<f:comment><![CDATA[
<f:some.invalid.syntax />
]]></f:comment>
Output:
Will be nothing.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\CommentViewHelper
f:count
This ViewHelper counts elements of the specified array or countable object.
Examples
Count array elements
<f:count subject="{0:1, 1:2, 2:3, 3:4}" />
Output:
4
inline notation
{objects -> f:count()}
Output:
10 (depending on the number of items in ``{objects}``)
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\CountViewHelper
subject
(array, optional): Countable subject, array or Countable
f:cycle
This ViewHelper cycles through the specified values. This can be often used to specify CSS classes for example.
To achieve the “zebra class” effect in a loop you can also use the “iteration” argument of the for ViewHelper.
Examples
These examples could also be achieved using the “iteration” argument of the ForViewHelper.
Simple
<f:for each="{0:1, 1:2, 2:3, 3:4}" as="foo">
<f:cycle values="{0: 'foo', 1: 'bar', 2: 'baz'}" as="cycle">
{cycle}
</f:cycle>
</f:for>
Output:
foobarbazfoo
Alternating CSS class
<ul>
<f:for each="{0:1, 1:2, 2:3, 3:4}" as="foo">
<f:cycle values="{0: 'odd', 1: 'even'}" as="zebraClass">
<li class="{zebraClass}">{foo}</li>
</f:cycle>
</f:for>
</ul>
Output:
<ul>
<li class="odd">1</li>
<li class="even">2</li>
<li class="odd">3</li>
<li class="even">4</li>
</ul>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\CycleViewHelper
values
(array, optional): The array or object implementing ArrayAccess (for example SplObjectStorage) to iterated overas
(strong): The name of the iteration variable
f:debug
This ViewHelper is only meant to be used during development.
Examples
Inline notation and custom title
{object -> f:debug(title: 'Custom title')}
Output:
all properties of {object} nicely highlighted (with custom title)
Only output the type
{object -> f:debug(typeOnly: true)}
Output:
the type or class name of {object}
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\DebugViewHelper
typeOnly
(boolean, optional): If TRUE, debugs only the type of variableslevels
(integer, optional): Levels to render when rendering nested objects/arrayshtml
(boolean, optional): Render HTML. If FALSE, output is indented plaintext
f:defaultCase
A ViewHelper which specifies the “default” case when used within the f:switch
ViewHelper.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\DefaultCaseViewHelper
f:else
Else-Branch of a condition. Only has an effect inside of f:if
.
See the f:if
ViewHelper for documentation.
Examples
Output content if condition is not met
<f:if condition="{someCondition}">
<f:else>
condition was not true
</f:else>
</f:if>
Output:
Everything inside the "else" tag is displayed if the condition evaluates to FALSE.
Otherwise nothing is outputted in this example.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\ElseViewHelper
if
(boolean, optional): Condition expression conforming to Fluid boolean rules
f:for
Loop ViewHelper which can be used to iterate over arrays.
Implements what a basic PHP foreach()
does.
Examples
Simple Loop
<f:for each="{0:1, 1:2, 2:3, 3:4}" as="foo">{foo}</f:for>
Output:
1234
Output array key
<ul>
<f:for each="{fruit1: 'apple', fruit2: 'pear', fruit3: 'banana', fruit4: 'cherry'}"
as="fruit" key="label"
>
<li>{label}: {fruit}</li>
</f:for>
</ul>
Output:
<ul>
<li>fruit1: apple</li>
<li>fruit2: pear</li>
<li>fruit3: banana</li>
<li>fruit4: cherry</li>
</ul>
Iteration information
<ul>
<f:for each="{0:1, 1:2, 2:3, 3:4}" as="foo" iteration="fooIterator">
<li>Index: {fooIterator.index} Cycle: {fooIterator.cycle} Total: {fooIterator.total}{f:if(condition: fooIterator.isEven, then: ' Even')}{f:if(condition: fooIterator.isOdd, then: ' Odd')}{f:if(condition: fooIterator.isFirst, then: ' First')}{f:if(condition: fooIterator.isLast, then: ' Last')}</li>
</f:for>
</ul>
Output:
<ul>
<li>Index: 0 Cycle: 1 Total: 4 Odd First</li>
<li>Index: 1 Cycle: 2 Total: 4 Even</li>
<li>Index: 2 Cycle: 3 Total: 4 Odd</li>
<li>Index: 3 Cycle: 4 Total: 4 Even Last</li>
</ul>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\ForViewHelper
each
(array): The array or SplObjectStorage to iterated overas
(string): The name of the iteration variablekey
(string, optional): Variable to assign array key toreverse
(boolean, optional): If TRUE, iterates in reverseiteration
(string, optional): The name of the variable to store iteration information (index, cycle, isFirst, isLast, isEven, isOdd)
f:format.cdata
Outputs an argument/value without any escaping and wraps it with CDATA tags.
PAY SPECIAL ATTENTION TO SECURITY HERE (especially Cross Site Scripting), as the output is NOT SANITIZED!
Examples
Child nodes
<f:format.cdata>{string}</f:format.cdata>
Output:
<![CDATA[(Content of {string} without any conversion/escaping)]]>
Value attribute
<f:format.cdata value="{string}" />
Output:
<![CDATA[(Content of {string} without any conversion/escaping)]]>
Inline notation
{string -> f:format.cdata()}
Output:
<![CDATA[(Content of {string} without any conversion/escaping)]]>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Format\CdataViewHelper
value
(mixed, optional): The value to output
f:format.htmlspecialchars
Applies PHP htmlspecialchars()
escaping to a value.
See http://www.php.net/manual/function.htmlspecialchars.php
Examples
Default notation
<f:format.htmlspecialchars>{text}</f:format.htmlspecialchars>
Output:
Text with & " ' < > * replaced by HTML entities (htmlspecialchars applied).
Inline notation
{text -> f:format.htmlspecialchars(encoding: 'ISO-8859-1')}
Output:
Text with & " ' < > * replaced by HTML entities (htmlspecialchars applied).
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Format\HtmlspecialcharsViewHelper
value
(string, optional): Value to formatkeepQuotes
(boolean, optional): If TRUE quotes will not be replaced (ENT_NOQUOTES)encoding
(string, optional): EncodingdoubleEncode
(boolean, optional): If FALSE html entities will not be encoded
f:format.printf
A ViewHelper for formatting values with printf. Either supply an array for the arguments or a single value.
See http://www.php.net/manual/en/function.sprintf.php
Examples
Scientific notation
<f:format.printf arguments="{number: 362525200}">%.3e</f:format.printf>
Output:
3.625e+8
Argument swapping
<f:format.printf arguments="{0: 3, 1: 'Kasper'}">%2$s is great, TYPO%1$d too. Yes, TYPO%1$d is great and so is %2$s!</f:format.printf>
Output:
Kasper is great, TYPO3 too. Yes, TYPO3 is great and so is Kasper!
Single argument
<f:format.printf arguments="{1: 'TYPO3'}">We love %s</f:format.printf>
Output:
We love TYPO3
Inline notation
{someText -> f:format.printf(arguments: {1: 'TYPO3'})}
Output:
We love TYPO3
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Format\PrintfViewHelper
value
(string, optional): String to formatarguments
(array, optional): The arguments for vsprintf
f:format.raw
Outputs an argument/value without any escaping. Is normally used to output an ObjectAccessor which should not be escaped, but output as-is.
PAY SPECIAL ATTENTION TO SECURITY HERE (especially Cross Site Scripting), as the output is NOT SANITIZED!
Examples
Child nodes
<f:format.raw>{string}</f:format.raw>
Output:
(Content of ``{string}`` without any conversion/escaping)
Value attribute
<f:format.raw value="{string}" />
Output:
(Content of ``{string}`` without any conversion/escaping)
Inline notation
{string -> f:format.raw()}
Output:
(Content of ``{string}`` without any conversion/escaping)
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\Format\RawViewHelper
value
(mixed, optional): The value to output
f:groupedFor
Grouped loop ViewHelper. Loops through the specified values.
The groupBy argument also supports property paths.
Using this ViewHelper can be a sign of weak architecture. If you end up using it extensively you might want to fine-tune your “view model” (the data you assign to the view).
Examples
Simple
<f:groupedFor each="{0: {name: 'apple', color: 'green'}, 1: {name: 'cherry', color: 'red'}, 2: {name: 'banana', color: 'yellow'}, 3: {name: 'strawberry', color: 'red'}}"
as="fruitsOfThisColor" groupBy="color"
>
<f:for each="{fruitsOfThisColor}" as="fruit">
{fruit.name}
</f:for>
</f:groupedFor>
Output:
apple cherry strawberry banana
Two dimensional list
<ul>
<f:groupedFor each="{0: {name: 'apple', color: 'green'}, 1: {name: 'cherry', color: 'red'}, 2: {name: 'banana', color: 'yellow'}, 3: {name: 'strawberry', color: 'red'}}" as="fruitsOfThisColor" groupBy="color" groupKey="color">
<li>
{color} fruits:
<ul>
<f:for each="{fruitsOfThisColor}" as="fruit" key="label">
<li>{label}: {fruit.name}</li>
</f:for>
</ul>
</li>
</f:groupedFor>
</ul>
Output:
<ul>
<li>green fruits
<ul>
<li>0: apple</li>
</ul>
</li>
<li>red fruits
<ul>
<li>1: cherry</li>
</ul>
<ul>
<li>3: strawberry</li>
</ul>
</li>
<li>yellow fruits
<ul>
<li>2: banana</li>
</ul>
</li>
</ul>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\GroupedForViewHelper
each
(array): The array or SplObjectStorage to iterated overas
(string): The name of the iteration variablegroupBy
(string): Group by this propertygroupKey
(string, optional): The name of the variable to store the current group
f:if
This ViewHelper implements an if/else condition.
Conditions:
As a condition is a boolean value, you can just use a boolean argument. Alternatively, you can write a boolean expression there. Boolean expressions have the following form:
XX Comparator YY
Comparator is one of: ==, !=, <, <=, >, >= and % The % operator converts the result of the % operation to boolean.
XX and YY can be one of:
number
Object Accessor
Array
a ViewHelper
string
<f:if condition="{rank} > 100">
Will be shown if rank is > 100
</f:if>
<f:if condition="{rank} % 2">
Will be shown if rank % 2 != 0.
</f:if>
<f:if condition="{rank} == {k:bar()}">
Checks if rank is equal to the result of the ViewHelper "k:bar"
</f:if>
<f:if condition="{foo.bar} == 'stringToCompare'">
Will result in true if {foo.bar}'s represented value equals 'stringToCompare'.
</f:if>
Examples
Basic usage
<f:if condition="somecondition">
This is being shown in case the condition matches
</f:if>
Output:
Everything inside the <f:if> tag is being displayed if the condition evaluates to TRUE.
If / then / else
<f:if condition="somecondition">
<f:then>
This is being shown in case the condition matches.
</f:then>
<f:else>
This is being displayed in case the condition evaluates to FALSE.
</f:else>
</f:if>
Output:
Everything inside the "then" tag is displayed if the condition evaluates to TRUE.
Otherwise, everything inside the "else"-tag is displayed.
inline notation
{f:if(condition: someCondition, then: 'condition is met', else: 'condition is not met')}
Output:
The value of the "then" attribute is displayed if the condition evaluates to TRUE.
Otherwise, everything the value of the "else"-attribute is displayed.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\IfViewHelper
then
(mixed, optional): Value to be returned if the condition if met.else
(mixed, optional): Value to be returned if the condition if not met.condition
(boolean, optional): Condition expression conforming to Fluid boolean rules
f:inline
Inline Fluid rendering ViewHelper
Renders Fluid code stored in a variable, which you normally would have to render before assigning it to the view. Instead you can do the following (note, extremely simplified use case):
$view->assign('variable', 'value of my variable');
$view->assign('code', 'My variable: {variable}');
And in the template:
{code -> f:inline()}
Which outputs:
My variable: value of my variable
You can use this to pass smaller and dynamic pieces of Fluid code to templates, as an alternative to creating new partial templates.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\InlineViewHelper
code
(string, optional): Fluid code to be rendered as if it were part of the template rendering it. Can be passed as inline argument or tag content
f:layout
With this tag, you can select a layout to be used for the current template.
Examples
<f:layout name="main" />
Output:
(no output)
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\LayoutViewHelper
Arguments
name
(string, optional): Name of layout to use. If none given, “Default” is used.
f:or
If content is empty use alternative text
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\OrViewHelper
content
(mixed, optional): Content to check if emptyalternative
(mixed, optional): Alternative if content is emptyarguments
(array, optional): Arguments to be replaced in the resulting string, using sprintf
f:render
A ViewHelper to render a section, a partial, a specified section in a partial or a delegate ParsedTemplateInterface implementation.
Examples
Rendering partials
<f:render partial="SomePartial" arguments="{foo: someVariable}" />
Output:
the content of the partial "SomePartial". The content of the variable {someVariable} will be available in the partial as {foo}
Rendering sections
<f:section name="someSection">This is a section. {foo}</f:section>
<f:render section="someSection" arguments="{foo: someVariable}" />
Output:
the content of the section "someSection". The content of the variable {someVariable} will be available in the partial as {foo}
Rendering recursive sections
<f:section name="mySection">
<ul>
<f:for each="{myMenu}" as="menuItem">
<li>
{menuItem.text}
<f:if condition="{menuItem.subItems}">
<f:render section="mySection" arguments="{myMenu: menuItem.subItems}" />
</f:if>
</li>
</f:for>
</ul>
</f:section>
<f:render section="mySection" arguments="{myMenu: menu}" />
Output:
<ul>
<li>menu1
<ul>
<li>menu1a</li>
<li>menu1b</li>
</ul>
</li>
[...]
(depending on the value of {menu})
Passing all variables to a partial
<f:render partial="somePartial" arguments="{_all}" />
Output:
the content of the partial "somePartial".
Using the reserved keyword "_all", all available variables will be passed along to the partial
Rendering via a delegate ParsedTemplateInterface implementation w/ custom arguments
<f:render delegate="My\Special\ParsedTemplateImplementation" arguments="{_all}" />
This will output whichever output was generated by calling My\Special\ParsedTemplateImplementation->render()
with cloned RenderingContextInterface $renderingContext as only argument and content of arguments
assigned in VariableProvider of cloned context. Supports all other input arguments including
recursive rendering, contentAs argument, default value etc.
Note that while ParsedTemplateInterface supports returning a Layout name, this Layout will not
be respected when rendering using this method. Only the render()
method will be called!
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\RenderViewHelper
section
(string, optional): Section to render - combine with partial to render section in partialpartial
(string, optional): Partial to render, with or without sectiondelegate
(string, optional): Optional PHP class name of a permanent, included-in-app ParsedTemplateInterface implementation to override partial/sectionrenderable
(TYPO3FluidFluidCoreRenderingRenderableInterface, optional): Instance of a RenderableInterface implementation to be renderedarguments
(array, optional): Array of variables to be transferred. Use {_all} for all variablesoptional
(boolean, optional): If TRUE, considers the section optional. Partial never is.default
(mixed, optional): Value (usually string) to be displayed if the section or partial does not existcontentAs
(string, optional): If used, renders the child content and adds it as a template variable with this name for use in the partial/section
f:section
A ViewHelper to declare sections in templates for later use with e.g. the f:render
ViewHelper.
Examples
Rendering sections
<f:section name="someSection">This is a section. {foo}</f:section>
<f:render section="someSection" arguments="{foo: someVariable}" />
Output:
the content of the section "someSection". The content of the variable {someVariable} will be available in the partial as {foo}
Rendering recursive sections
<f:section name="mySection">
<ul>
<f:for each="{myMenu}" as="menuItem">
<li>
{menuItem.text}
<f:if condition="{menuItem.subItems}">
<f:render section="mySection" arguments="{myMenu: menuItem.subItems}" />
</f:if>
</li>
</f:for>
</ul>
</f:section>
<f:render section="mySection" arguments="{myMenu: menu}" />
Output:
<ul>
<li>menu1
<ul>
<li>menu1a</li>
<li>menu1b</li>
</ul>
</li>
[...]
(depending on the value of {menu})
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\SectionViewHelper
name
(string): Name of the section
f:spaceless
Space Removal ViewHelper
Removes redundant spaces between HTML tags while preserving the whitespace that may be inside HTML tags. Trims the final result before output.
Heavily inspired by Twig’s corresponding node type.
Usage of f:spaceless
<f:spaceless>
<div>
<div>
<div>text
text</div>
</div>
</div>
</f:spaceless>
Output:
<div><div><div>text
text</div></div></div>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\SpacelessViewHelper
f:switch
Switch ViewHelper which can be used to render content depending on a value or expression.
Implements what a basic PHP switch()
does.
An optional default case can be specified which is rendered if none of the
case
conditions matches.
Using this ViewHelper can be a sign of weak architecture. If you end up using it extensively you might want to consider restructuring your controllers/actions and/or use partials and sections. E.g. the above example could be achieved with :html:`<f:render partial="title.{person.gender}" />` and the partials “title.male.html”, “title.female.html”, … Depending on the scenario this can be easier to extend and possibly contains less duplication.
Examples
Simple Switch statement
<f:switch expression="{person.gender}">
<f:case value="male">Mr.</f:case>
<f:case value="female">Mrs.</f:case>
<f:defaultCase>Mr. / Mrs.</f:defaultCase>
</f:switch>
Output:
"Mr.", "Mrs." or "Mr. / Mrs." (depending on the value of {person.gender})
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\SwitchViewHelper
expression
(mixed): Expression to switch
f:then
f:then
only has an effect inside of f:if
. See the f:if
ViewHelper for documentation.
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\ThenViewHelper
f:variable
Variable assigning ViewHelper
Assigns one template variable which will exist also after the ViewHelper is done rendering, i.e. adds template variables.
If you require a variable assignment which does not
exist in the template after a piece of Fluid code
is rendered, consider using f:alias
ViewHelper instead.
Usages:
{f:variable(name: 'myvariable', value: 'some value')}
<f:variable name="myvariable">some value</f:variable>
{oldvariable -> f:format.htmlspecialchars() -> f:variable(name: 'newvariable')}
<f:variable name="myvariable"><f:format.htmlspecialchars>{oldvariable}</f:format.htmlspecialchars></f:variable>
- Implementation:
TYPO3Fluid\Fluid\ViewHelpers\VariableViewHelper
value
(mixed, optional): Value to assign. If not in arguments then taken from tag contentname
(string): Name of variable to create